TotalBoat Marine Topside Boat Paint Primer for Fiberglass and

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray), 1 Gallon (Pack of 1)
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
Country USA
Brand TotalBoat
Manufacturer TotalBoat
Binding Unknown Binding
ItemPartNumber 365403
Model 365403
Color Gray
Size 128 Fl Oz (Pack of 1)
UnitCount 1
UPCs 811932020307
EANs 0811932020307
ReleaseDate 0000-00-00

Country	USA
Brand	TotalBoat
Manufacturer	TotalBoat
Binding	Unknown Binding
ItemPartNumber	365403
Model	365403
Color	Gray
Size	128 Fl Oz (Pack of 1)
UnitCount	1
UPCs	811932020307
EANs	0811932020307
ReleaseDate	0000-00-00

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray), 1 Gallon (Pack of 1)