TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood
Sold Out / Out of Stock
This item may be available in a different size, colour, scent, version or platform:
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood
ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
Premium topside paint primer for use with all 1- and 2-part polyurethane and enamel topside paints. Apply with brush, roller, or spray before painting. Use on wood, fiberglass, gelcoat and over previously painted materials in good condition. This high-solids primer requires only a single coat and dries fast. Choose white or gray in both quart and gallon sizes. All TotalBoat marine products are developed by boaters for boaters, to provide great value and great results.