Thermally Conductive Silicone Grease Mil-Spec High Heat

Thermally Conductive Silicone Grease Mil-Spec High Heat Transfer System Industrial Military Grade, Thermo-Grease 04, 2.5gm Syringe(s)
- Apperance - Off White
- Cure Type -
- Viscosity - Paste
- Dissipation Factor -
- Operating Temp - -40 to 190°C
http://conductivex.com/Thermally-Conductive-Silicone-Grease-Mil-Spec-High-Heat-Transfer-System-Industrial-Military-Grade
Thermo-Grease 04 is an opaque white heat sink grease compound, which is applied to the base and mounting studs of transistor and diodes to provide a positive heat sink seal, this facilitates heat transfer away from electrical/electronic components and into heat sinks, thereby increasing the overall efficiency and performance of the device. GR104 is grease like silicone material, heavily filled with efficient heat conductive zinc oxide and a binding agent, this combination promotes high thermal conductivity, high temperature stability, and the lowest amount of bleed and evaporation. Thermo-Grease 04 thermal compound resists changes in consistency temperatures up to 180C; function as heat transfer media, durable dielectric insulation, barrier against environmental contaminants and as a stress-relieving shock and vibration absorbed over a wide temperature and humidity range.Appearance - Off White
Base - Silicone
Cure Schedule - cure_schedule
Cure Type -
Dielectric - 4.4
Dielectric - 390
Filler - Zinc Oxide
Operating - -40 to 190C
Potential - Thermal coupler for any heat sink device temperature sensors, power transistors, thermal joints, for any device where efficient cooling is required.
Press - 15
Shelf - 2 years
Specific - 2.46
Thermal - 0.9
Viscosity - Paste
Volume Resistivity - 2.9 E+14
Country USA
Brand ConductiveX
Manufacturer ConductiveX
ItemPartNumber Thermo-Grease 04-2.5gm
UnitCount 1
ReleaseDate 0000-00-00

Country	USA
Brand	ConductiveX
Manufacturer	ConductiveX
ItemPartNumber	Thermo-Grease 04-2.5gm
UnitCount	1
ReleaseDate	0000-00-00

Thermally Conductive Silicone Grease Mil-Spec High Heat Transfer System Industrial Military Grade, Thermo-Grease 04, 2.5gm Syringe(s)