Steel Hex Nut, M3-0.5 Threads, Made in US (Pack of 100)

Steel Hex Nut, M3-0.5 Threads, Made in US (Pack of 100)
- Hex Nuts are appropriate for use in low-strength assemblies
- Plain Steel fasteners are suitable where strength and value are the primary considerations
- Drive system is a hexagon-shaped head
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
- Ensure a lasting hold for any project
Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex Nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.

Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Country USA
Brand Small Parts
Manufacturer Small Parts
Binding Misc.
ItemPartNumber B000NBIH92
Model B000NBIH92
Size M3-0.5
UnitCount 100
ReleaseDate 0000-00-00

Country	USA
Brand	Small Parts
Manufacturer	Small Parts
Binding	Misc.
ItemPartNumber	B000NBIH92
Model	B000NBIH92
Size	M3-0.5
UnitCount	100
ReleaseDate	0000-00-00

Steel Hex Nut, M3-0.5 Threads, Made in US (Pack of 100)

You might also like...