Sovol Solder Fume Extractor, 100W Suction Smoke Absorber

Sovol Solder Fume Extractor, 100W Suction Smoke Absorber Remover with Air Volume 200m³/h, 3-Stage Filtration, 2 shapes of Smoke Hoods and 3 Exhaust Hoses for Welding Smoke Absorption Soldering
- [Super Strong 3 Stage Purification] - Sovol smoke absorber has a 3 stage filter with an air purification rate of up to 99.97%.The first layer of high-density filter will initially trap large particels such as dust and debris, the second layer of High Efficiency H13-Grade HEPA Filter remove at least 99.97% of particles with a size of 0.3 microns (um), the third layer Activated Carbon Filter remove VOCs. The filter replacement kit will be available soon on Amazon
- [100W Suction to Remove Smoke and Odor] - 100W power output brings Sovol Fume Extractor excellent absorption capacity. Air volume reaches 200m³/h. The upper cover and the body are sealed with EVA cotton to prevent smoke leakage, increase the effect, and reduce vibration noise. We also upgrade the Odor removal function of this Fume Extractor. It can greatly reduce the smell of the filtered gas
- [Two-in-one Exhaust Hose Adapter] - φ80mm and φ100mm universal adapter can be adapted to a wider range of exhaust hoses and air outlets of more equipments. The built-in smoke absorber hose can change direction 360 degrees at will. It can be stretched and compressed. Bend the tube to the direction of your project, regardless of which direction you are working on. The Fume Extractor also comes with extra 2 soft exhaust pipes ( φ80mm and φ100mm ) help you to fit for more equipments
- [Dual-specification Smoke Hoods] - Square and round smoke hoods can be used in a wider range of scenarios. Sovol Fume Extractor is Applicable to most laser engraving machines, closed laser engraving machines, laser protective covers, closed 3D printers, 3D printer insulation covers, light-curing printers, etc. on the market, and can also be used in nails beauty, moxibustion beauty, manual soldering
- [Silicone Foot Pad and Handle Design] - The soft silicone foot pad can make the machine more stable and not easy to slide, and it will also reduce the noise generated by the vibration of the machine and the contact surface; the handle is located at the top, which can move the machine more conveniently
- [Filter cleaning and filter replacement frequency] - Pre filter should be replaced once per 1 month, HEPA filter and activated carbon filter should be replaced once per 1-3 months. If there is a lot of dust or large particles in the environment, it is recommended that you clean the pre filter once before each use; when the machine sounds an alarm, it is recommended that you clean the pre filter as soon as possible to prevent the filter from being blocked, which may cause the fan to burn out due to high temperature
Country USA
Brand Sovol
Manufacturer Sovol
Binding Misc.
Model /
ReleaseDate 0000-00-00

Country	USA
Brand	Sovol
Manufacturer	Sovol
Binding	Misc.
Model	/
ReleaseDate	0000-00-00

Sovol Solder Fume Extractor, 100W Suction Smoke Absorber Remover with Air Volume 200m³/h, 3-Stage Filtration, 2 shapes of Smoke Hoods and 3 Exhaust Hoses for Welding Smoke Absorption Soldering