SeDeplacer Micro SD Memory Card Adapter Compatible with Sony PSP Go - Supports an Extended Capacity of 128gb
$ 137
Availability: Currently in Stock
Delivery: 10-20 working days
SeDeplacer Micro SD Memory Card Adapter Compatible with Sony PSP Go - Supports an Extended Capacity of 128gb
Compatible With:Micro SD Memory Card Adapter Compatible with Sony PSP Go(Supports an Extended Capacity of 128gb)
Applicable Scenarios:Adapter supports Micro SD cards up to 128gb.Cannot insert cards higher than 128GB, cards with higher capacity may be overloaded.Upon inserting a Micro SD card for the first time via the adapter, the system will prompt.you to format the Memory Stick before it can be fully read. You can go to system settings as there is an option to format the SD card and format the SD card easily
Installation Steps 1: 1.Use tools to remove the PSP Go backboard.Clip and cut flush the small plastic posts from the inside part of the backplate 2.Place your Micro SD card inside of the Memory Stick PRO Duo adapter 3.Open the M2 slot cover on the PSP Go and Insert the adapter in. Once you slot it in, you should hear a clicking sound. If you don’t hear a clicking sound, make sure you’re pushing it in all the way until it clicks.Installed in place
Installation Steps 2: 4.Once the insertion recognition is successful, you should receive a message stating that you need to format the card. Operation: Go to Settings on the Media Bar - Format Memory Stick Options (follow the prompts to complete its operation) - Format Complete 5. Switch to Memory Stick - If you can see all the extra storage space, it means the mold is working properly 6.Carefully fold the Micro SD Memory Card Adapter onto the back of the model 7.Apply pieces of tape(We do not provide) to keep the adapter in place 8.Place the backplate on the back and insert the screws to close it back up
Tip 1: If you've inserted the adapter into the M2 slot and it says 0kb in the capacity, or the SD card isn't recognized right away, give it a few seconds to load, and if it doesn't, take itout and re-insert it back in until the PSP Go recognizes the SD card and Its capacity.You may need to remove and re-insert the adapter a few times until it reads the card
Tip 2:lf you have inserted the SD card into the adapter card reader and the adapter isn'trecognizing the card and the orange light on the left of your device is blinking rapidly, goahead and remove the adapter, remove the SD card from the card reader also, once youhave done this, re-insert the SD card again, then re-insert the adapter back into the M2 slot