Qbace CV Joint Banding Tool And Cutter

Qbace CV Joint Banding Tool And Cutter

CV Clamp Banding Tool Features: The perfect set for fast and simple tensioning and securing of CV boot banding strap. CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. Can also be used for securing late model GM CVJ boot clamps. Crimps and flattens clamps on ear type CV joint boot clamps. Specifications Heavy Duty Comfortable double dipped handles Hardened steel CV boot clamp installer To be used with any banding up to 10mm in width CV Boot & Hose Clamp Pliers Ear Type Crimps and flattens clamps on ear type CV joint boot clamps For installing CV Clamps Standard banding tool for CV Joint Boots Instructions 1. Wrap free-end Clamps 3/8 inch or 1/4 inch roll band and clip around boot. Theread the band throught the nose of the tool and through the winding mandrel slot. 2. Place a 1/2 inch ratchet wrench on the winding mandrel and turn. When sufficient tension has been applied,rotate the tool over the boot, bending the band back onto the clip. 3.It applies tension and has a built-in cutter. 4. To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip. Note: for added strength, double-wrapped band is recomended.
Country USA
Brand Aftermarket
ItemPartNumber CT0067
Model 13
UPCs 702865668660
EANs 0702865668660
ReleaseDate 0000-00-00

Country	USA
Brand	Aftermarket
ItemPartNumber	CT0067
Model	13
UPCs	702865668660
EANs	0702865668660
ReleaseDate	0000-00-00

Qbace CV Joint Banding Tool And Cutter

You might also like...