Pool Mate 1-2604B Pool Stabilizer for Pools, 4-Pounds

Pool Mate 1-2604B Pool Stabilizer for Pools, 4-Pounds
- Cyanuric acid for pools
- Helps reduce chlorine loss
- Recommended cyanuric acid level is 40-100 ppm
- 6 ounces raises cyanuric acid level 10 ppm per 5,000 gallons of water
- Increases cyanuric acid level
- Decreases chlorine loss due to sunlight
- Reduce chlorine consumption up to 25%
- Improves the effectiveness of chlorine
Pool Mate Chlorine Stabilizer and Conditioner will cut chlorine loss caused by sunlight. Customers save money when they use Pool Mate Chlorine Stabilizer and Conditioner. If you use Pool Mate Chlorine Stabilizer and Conditioner you can cut chlorine consumption by up to 25%. Pool Mate Chlorine Stabilizer and Conditioner will help sustain ongoing chlorine residual. Add this product to your pool in the spring and you will improve chlorine effectiveness all season long. This product disperses rapidly to establish a chlorine protection quickly. It stabilizes pool water and extends the life of the disinfectant. Use a reliable test kit to determine the stabilizer concentration in the pool water. Follow the guide below to bring the pool water to the desired range of 40-100 ppm. If the pool is new, just refilled, or has no stabilizer; add 4 oz. of this product per 1000 gallons to give the desired 40-100 ppm. Add this product slowly into the skimmer, or if desired, premix in a pail of warm water and then add directly to the skimmer. Be sure the filter is clean. Recirculate the water continuously for 24 hours to dissolve completely. Always maintain the chlorine residual in your pool at 2.0-4.0 ppm and pH at 7.4-7.6. For 5,000 gallon pools, to increase 10ppm add 6.3 oz., to increase 20 ppm add 12.5 oz., to increase 30 ppm add 1.2 lbs., to increase 40ppm add 1.6 lbs., to increase 50ppm add 2.0 lbs. For 10,000 gallon pools, to increase 10ppm add 12.5 oz., to increase 20 ppm add 1.6 lbs., to increase 30 ppm add 2.3 lbs., to increase 40ppm add 3.1 lbs., to increase 50ppm add 3.9 lbs.. For 20,000 gallon pools, to increase 10ppm add 1.6 lbs., to increase 20 ppm add 3.1 lbs., to increase 30 ppm add 4.7 lbs., to increase 40ppm add 6.3 lbs., to increase 50ppm add 7.8 lbs.. Contains 100% Cyanuric Acid.
Country USA
Brand Pool Mate
Manufacturer Robelle Industries
Binding Lawn & Patio
ItemPartNumber FBA_1-2604B
Model 1-2604B
Size 4-Pounds
UnitCount 1
UPCs 676215237946
EANs 0676215237946
ReleaseDate 0000-00-00

Country	USA
Brand	Pool Mate
Manufacturer	Robelle Industries
Binding	Lawn & Patio
ItemPartNumber	FBA_1-2604B
Model	1-2604B
Size	4-Pounds
UnitCount	1
UPCs	676215237946
EANs	0676215237946
ReleaseDate	0000-00-00

Pool Mate 1-2604B Pool Stabilizer for Pools, 4-Pounds

You might also like...