Neenah IMAGE CLIP LASER Light Transfer Paper For Laser

Neenah IMAGE CLIP LASER Light Transfer Paper For Laser Printers 20 sheets
- INSTRUCTIONS IMAGE CLIP LASER LIGHT TRANSFER PAPER: PRINTING 1) Mirror the Image. 2) Laser print the coated side of the paper identified as the Imaging Sheet
- 3) IMAGE CLIP® Laser Light Paper should be fed into the copier or printer with the short dimension first (grain long). For best fusing results use a heavy paper setting.
- WASHING INSTRUCTIONS Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low heat setting. Do not iron directly on the transferred area.
TRANSFERRING IMAGE CLIP LASER LIGHT TRANSFER PAPER

Use Commercial Heat Press

1) Marry the imaged sheet with the transfer sheet. This will apply the transfer coating to the imaged area. Press: 10 seconds at 210Â° F using light/medium pressure
.
Separate the papers while still hot.

2. Place the imaging sheet face down onto the fabric. Press: 15 seconds at 400Â° F using heavy pressure.

Peel off the backing paper while it is still hot. For the best feel, stretch the fabric after pressing while it is still hot.
Country USA
Binding Office Product
Brand World-Paper IMAGE CLIP LASER Light
NumberOfItems 1
ReleaseDate 0000-00-00

Country	USA
Binding	Office Product
Brand	World-Paper IMAGE CLIP LASER Light
NumberOfItems	1
ReleaseDate	0000-00-00

Neenah IMAGE CLIP LASER Light Transfer Paper For Laser Printers 20 sheets