Mudder Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 with Rosin Core for Electrical Soldering 0.22lbs (0.6 mm)
Sold Out / Out of Stock
This item may be available in a different size, colour, scent, version or platform:
Mudder Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 with Rosin Core for Electrical Soldering 0.22lbs (0.6 mm)
Lead-free solder wire: lead-free solder wire with rosin core; It weighs 100 g/ 0.22 lb; The size of solder wire roll is 5.4 x 5.4 x 2.8 cm/ 2.1 x 2.1 x 1.1 inches
Relative parameters: the diameter of the electrical soldering wire is 0.6 mm/ 0.023 inch; Sn/ Ag/ Cu: 99%/ 0.3%/ 0.7%; Flux: 2%
Easy to use: the melting point of soldering iron wire is 215 - 220 degrees Celsius/ 419 - 428 degrees Fahrenheit; Flows well and heats evenly, easy to use
Good quality soldering wire: good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly
Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices
Electrical soldering wire: Lead-free solder wire with rosin core; It weighs 100 g/ 0.22 lb; The size of solder wire roll is 5.4 x 5.4 x 2.8 cm/ 2.1 x 2.1 x 1.1 inches.
Relative parameters: The diameter of the lead-free solder wire is 0.6 mm/ 0.023 inch; Sn/ Ag/ Cu: 99%/ 0.3%/ 0.7%; Flux: 2%.
Flows well and heats evenly: The melting point of soldering iron wire is 215 - 220 degrees Celsius/ 419 - 428 degrees Fahrenheit; Flows well and heats evenly, easy to use.
Good solder ability: Good quality soldering wire, good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly.
Wide usage: The rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Warm notice: Lead-free solder has a higher melting temperature, which may require a higher temperature tip or rheostat, depending on your iron. A separate soldering iron tip is recommended to keep your project lead free.Â