MidTen Bore Sight 12 Gauge Laser Red Dot Boresighter with

MidTen Bore Sight 12 Gauge Laser Red Dot Boresighter with Three of Batteries
- Class IIIA laser, less than 5mW
- Made to fit the 12-Gauge chamber, caliber specific
- Comes with 1 set batteries (3 AG13 batteries) which can last eight hours.
- Easy to sit perfectly in the bore. Sturdy brass construction. Fast gun zeroing and sighting.
- High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards.
Specification
-- Length:60mm; Tail width: 22mm; Head width: 20mm
-- Laser Wave length (nm:) 640 to 660
-- LED Type: visible red laser
-- Power: <5 mW
-- Construction: Brass
-- Sighting Range: 15 to 100 yards
-- Dot Size: 2 inches at 100 yards
-- Operation: On/Off End Cap
-- Temperature: -10℃ to 40℃
-- Battery Type:3 X AG13 (Included)

How to use the bore sight?
1.Unscrew the back cap from the bore sight by turning counter clockwise
2.Stand the bore sight on a flat surface with the laser side pointing down
3.Insert batteries (+ side up) inside the rear opening
4.Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on)
5.Place in your rifle's chamber and close the bolt
6.To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle's barrel upward (always practicing safe firearm practices)
7.Unscrew the back and remove the batteries to turn the unit off

Package included
-- 1 X Bore Sight
-- 3 X AG13/LR44 Batteries
Country USA
Brand MidTen
Manufacturer yawan
Binding Misc.
Color Tan
UPCs 712096309317
EANs 0712096309317
ReleaseDate 0000-00-00

Country	USA
Brand	MidTen
Manufacturer	yawan
Binding	Misc.
Color	Tan
UPCs	712096309317
EANs	0712096309317
ReleaseDate	0000-00-00

MidTen Bore Sight 12 Gauge Laser Red Dot Boresighter with Three of Batteries

You might also like...