☰

Tools & Home Improvement

Power & Hand Tools

Power Tool Parts & Accessories

Router Parts & Accessories

Straight, Spiral & Trim Bits

LMT Onsrud 65-026 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

$ 384

Availability: Currently in Stock

Delivery: 10-20 working days

LMT Onsrud 65-026 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
The polished flute allows for razor sharp cutting edge and easy chip evacuation. Use for plastic, wood, aluminum and solid surface. Upcut spiral for improved chip evacuation.
Country USA
Brand LMT Onsrud
Manufacturer LMT Onsrud
Binding Misc.
ItemPartNumber 65-026
Model 65-026
Size 1/4 in
UnitCount 1
UPCs 895680017345
EANs 0895680017345
ReleaseDate 0000-00-00

You might also like...

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2" Cutting Length, 1/8" Cutting Diameter, 1/4" Shank Diameter, 2" Overall Length (Pack of 1)

LMT Onsrud 65-025 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.5000

LMT Onsrud 65-025 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

LMT Onsrud 64-026 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000

LMT Onsrud 64-026 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

LMT Onsrud 37-01 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005

LMT Onsrud 37-01 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1)

LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000

LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter