IndusTec Wired 20 AMP 12V DC Motor Polarity Reversing Rocker

IndusTec Wired 20 AMP 12V DC Motor Polarity Reversing Rocker Maintained Latch Switch
- Rocker Switches house a button for operation that can be pressed on either end like a seesaw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices. A maintain switch changes its position when actuated and will remain in the position until actuated again. Stays / Maintains / Latched / Lock/ Locked/ Locking in position placed.
- 15 amps at 250 VAC and 20 Amps At 125 VAC or 20 Amps At 12 V DC and 10 Amps at 24 Volt DC. Also make sure you are using a switch and wires sufficient to handle the power that you are carrying. In higher draw applications, a relay may be needed. Always use a fast blow fuse of rated amperage. Use terminals of good enough grade to handle the amperage in switch to avoid heat and damage.
- 8 inch wires With 1/4" female connectors attached. Hole size is 7/8" X 1-1/16" 22mm X 27mm. 6 Pin prong Terminal. Can be used as a forward reverse switch.
- Light weight construction.Double Throw Double Pole Two Position. DPDT is equivalent to two SPDT switches. It routes two separate circuits, connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which each of the two contacts can be routed. They can connect two different power sources to two different loads or accessories at the same time.
- Our Heavy Duty and Durable Rocker Switches are great in Car, Car accessories, Truck, Boats, ATV, UTV, RV, Race Cars, Racing needs, Airplane, Aviation, Nitrous, NOS, Jack Hoist Actuator, Liftgate, LED Light Bar, Sound System, Outdoor Lights, Camper, Trailer, Headlights, Electronics, Dashboard Panel, Solar, Awning, Motorcycles, Winch, Automation, Robotics, Kill Switch, Linear Actuator, Auxiliary Cooling Fans, Boat lift, up and down DIY Projects and so much more.
Industrial Technicians Presents
Motor Polarity Reversing Rocker Switch 20 amps 12V DC
Hook Red to + V DC and Black to - V DC Blues to Motor
The dc motor will reverse one way then the other with switch
The switch will latch, stays in last position operated to
20 Amps at 12V DC and 10 Amps at 24V DC

Country	USA
Brand	INDUSTEC MAINTENANCE SOLUTIONS WE'RE IT WWW.INDUSTRIALTECHNICIANS.COM
Manufacturer	IndusTec
ItemPartNumber	IRS2236LarrowsMPRW
Model	IRS2236LMPRW
Color	Black
Size	1" x 7/8" cut out 27 mm X 22 mm Approx.
UnitCount	1
ReleaseDate	0000-00-00

IndusTec Wired 20 AMP 12V DC Motor Polarity Reversing Rocker Maintained Latch Switch

You might also like...