Hydraulic Gear Motor or Pump bi-Direction Rotation, 8cc/rev

Hydraulic Gear Motor or Pump bi-Direction Rotation, 8cc/rev (0.488in3/rev) 8.4gpm at 4000rpm 21HP SAE A Mount, MFEG Series
- High Pressure Hydraulic Pump or Motor, Bi-directional rotation. Universal SAE A mounting flange and shaft sizes fit readily available pump/motor bell housing adapters and couplings. Many motors of this type are in appllications that this could be used to replace.
- IMPORTANT: THE LOW PRESSURE SIDE OF THE MOTOR MUST NOT EXCEED 100 PSI OR THE SHAFT SEAL WILL LEAK. IF THE OUTLET PRESSURE EXCEEDS 100 PSI CONNECT THE EXTERNAL DRAIN PORT LOCATED ON THE REAR COVER TO YOUR TANK. MAKE SURE THERE ARE MINIMAL RESTRICTICTIONS TO THE TANK.

Hydraulic Gear Motor or Pump bi-Direction Rotation, 8cc/rev (0.488in3/rev) 8.4gpm at 4000rpm 21HP SAE A Mount, MFEG Series