Hantek 1008C PC USB 8CH Automotive Diagnostic Digital

Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator
- 8-Channel Automotive Oscilloscope: A virtual oscilloscope that combines automotive diagnostic functions, general-purpose oscilloscope functions and a programmable signal generator
- Automotive Diagnostic Functions: More than 80 automotive diagnostic functions (Ignition/Sensor/Bus Detection/Actuator/Starting & Charging, etc.) come standard. Quickly diagnose the stability of automotive systems and make judgements
- Universal Oscilloscope Function: 8 analogue channels, 12 bits resolution, 4K memory depth, 2.4MSa/s real-time sampling rate; 20 automatic measurement modes, can be selected with one key to turn on or off, convenient and intuitive to read the signal measurement results
- Programmable Signal Generator with USB storage: 8 channels, LVTTL output level, 0-250KHz frequency range. Signal generator function to simulate crankshaft and camshaft signals
- The 8-channel automotive oscilloscope is easy to operate and suitable for electricians as well as technicians, hobbyists and electronics enthusiasts to learn basic circuit diagnostics, basic electronic equipment troubleshooting and repair of automobiles, home appliances and other electronic products. Can transfer signals through the USB 2.0 interface, easy to connect to Android devices such as tablets, smart phones and personal computers
Model:Hantek1008
Vertical System
Analog Channel:8
Input Impedance:Resistance: 1MΩ
Input Sensitivity:10mV/div to 5V/div
Input Coupling:DC
Resolution:12 bits

Horizontal System

Memory Depth:4K
Max. Input:400V (DC+AC Peak)
Real-Time Sampling Rate:2.4MSa/s
Time BaseRange:1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision:±50ppm

Trigger System

Time Base Range:1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision:±50ppm
Trigger Source:CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8
Trigger Mode:Edge

X-Y Mode

X-Axis Input:CH1
Y-Axis Input:CH2

Cursors and Measurement

Voltage Measurement:Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement:Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement:Horizontal ,Vertical, Track, Auto Measure Modes
Waveform Signal Process:+,- , x,÷, FFT, Invert
Voltage Range:10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1
Current Range:100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A)
FFT:Rectangular, Hanning, Hamming, Blackman Window
Math:Addition, subtraction, multiplication, division

Programmable Generator

Channel:8
Output Level:LVTTL
Frequency Range:0-250kHz
Interface:USB 2.0(Full Speed)
Power:No need extra power supply
Size & Weight:185 x 150 x 27 (mm); 0.35kg
Country USA
Brand Hantek
Manufacturer Hantek
Binding Misc.
ItemPartNumber 1008C
Model 1008C
UnitCount 11
UPCs 889743087741
EANs 0889743087741
ReleaseDate 0000-00-00

Country	USA
Brand	Hantek
Manufacturer	Hantek
Binding	Misc.
ItemPartNumber	1008C
Model	1008C
UnitCount	11
UPCs	889743087741
EANs	0889743087741
ReleaseDate	0000-00-00

Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator

You might also like...