Hang It Yourself Cabinet Installation System (HIYW94")

Hang It Yourself Cabinet Installation System (HIYW94")
- Professional results with DIY skills - The system is designed for one person cabinet installation in 3 basic steps: 1)Attach the rail to the wall. 2) Mount the brackets on the cabinets. 3) Hang the cabinets on the rail.
- 1) Attach the rail- the wall rails are pre-punched with holes 3/4" on center to enable at least one fastener to be attached to every wall stud. The rail is easily leveled, shimmed, aligned and secured.
- 2) Mount the brackets- the auto aligning brackets allow each cabinet to be supported independently on the rail without any localized stress on it or an adjacent cabinet.
- 3) Hang the cabinets- with the cabinets fully suspended on the rail via the brackets, they can be moved, aligned and the faces attached to one another.
- The top of the rail sits 1 and 3/16" above the top of the cabinet and is typically hidden by crown moulding or other readily available trim. The hanging system typically holds a cabinet about 5/16" off the wall which is normally covered by scribe trim.
- For installation on other than wood framing such as metal stud, brick, block or concrete walls, we recommend using 3/16" Toggler brand Snap-Toggles through the metal studs and 3/16" Hex head Tapcon fasteners for brick, block and concrete. Presently, the hardware kits only contain fasteners for wood framing installation.
Country USA
Brand Hang It Yourself
Manufacturer Hang-It-Yourself
Model HIYW94
Color Aluminum
Size HIYW94.0
UnitCount 1
UPCs 850033846027
EANs 0850033846027
ReleaseDate 0000-00-00

Country	USA
Brand	Hang It Yourself
Manufacturer	Hang-It-Yourself
Model	HIYW94
Color	Aluminum
Size	HIYW94.0
UnitCount	1
UPCs	850033846027
EANs	0850033846027
ReleaseDate	0000-00-00