Funshowcase Growing Crystal Quartz Rock Cluster Geode Druzy Gem Silicone Mold Trays 6-Count for Resin Epoxy, Soap, Candle, Isomalt Assorted Size (Smaller)

Wash and boil before use, especially for food.

Easy to use mould very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade.

Some material ( such as clay, paste etc. ) may extend a bit when pull out of the mold.

Food Grade. Food and Non Food material should use separately.

For delicate or complicated item, please remove the product from the silicone mold very carefully, at first slightly bend mold from the edges, then easy press on the center of the mold and remove the product.

1) poured in silicone molds in layers, allowing air bubbles completely escape; 2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

After baking clay / resin in complex or deep molds remove the finished product under running water with soap.

All molds are reusable.

FQAs:

What is advantages of silicone molds and the different between silicone and plastic molds.

1 Flexible. Silicone molds allow you to do very complex castings that can be removed much more easily as compared to plastic molds.

2 Castings may come out more shiny than a plastic mold.

3 Durable. Not easily scratch the sarface as plastic mold. Silicone mold can last for many years and thousands of casting if cared for properly.

4 However, silicone molds require more care. Silicone molds should be cleaned after use and stored flat in a cool, dry area for protection reason. ( if you want to use thousands of times )

5 Both silicone molds and plastic molds can be treated with a mold release before use.