FullfunRC Waterproof Brushed ESC with Dirtproof Switch for 1/10 Traxxas HPI Redcat Tamiya RC Truck, Buggy, Short Course Truck and Rock Crawler

Input

Lipo  2S  Capacity≤3500mA/20C

Ni-MH  5-6 cells  Capacity≤3500mA/20C

Output

Continuous current: 45A/8.2V

Peak current: 350A/8.2V, ≤10ms

BEC output current: 2A/5.6V

BEC input current: ≤3A/5.6V

Brushed Motor compatible

540 size motor ＞ 12T

550 size motor ＞ 12T

Other size motor＞ 12T or RPM＜[email protected]

Model compatible: ≤1/10 scale touring car, buggy, short course truck, monster truck, crawler

Cutoff Function

Voltage cutoff:  a. 2S Lipo: cutoff ≤6.6V,  or＞10.5V;  b.Ni-MH: cutoff ≤4.5V

Overheat cutoff: cutoff ＞100℃, resume ＜85℃ 

Mode: Practise Mode and Crawling Mode for choosing

ESC Instruction

Throttle Setup:

Switch on the transmitter first, and then the ESC, put the throttle trigger on a neutral position, wait for self-detection of ESC and automatic throttle correction(about three seconds). After the self-detection done, you will hear four different tone of 'Doo' sound and the ESC is ready to use.

Mode Setup:

Practise Mode - Switch on the ESC first and press the setup button, release when you hear 'doo' sound.

Crawler Mode - Switch on the ESC first and press the setup button, release when you hear 'doo doo' sound.

Battery Setup

Ni-MH Battery: When using Ni-MH battery, press the setup button first and switch on the ESC, release when you hear 'doo' sound.

Lipo Battery: When using Lipo battery, press the setup button first and switch on the ESC, release when you hear 'doo doo' sound.

IMPORTANT: The ESC may not compatible with CoolRC TG3 Radio settings. We will offer more details for resetting CoolRC TG3 very soon for users using TG3.