Flexible Moulding - Stain Grade Oak - Flexible Quarter Round

Flexible Moulding - Stain Grade Oak - Flexible Quarter Round Moulding - WM105 - 3/4" X 3/4" - 12' Length - Flexible Trim
- Moisture proof. Can withstand extreme heat and cold temps without warping or cracking.
- Flexible Moulding will bend like a belt. Seamless construction without lamination defects.
- For applications with a minimum radius of 6" or greater.
- For indoor and outdoor use.
- Ease of installation using standard woodworking equipment - cut, sand, shape and finish like wood.
- Duraflex Flexible Moulding:
  - Moisture & Insect proof.
  - Bends like a belt around your waist.
  - Withstands extreme heat and cold temperatures without warping, cracking or deteriorating.
  - Seamless construction without lamination defects.
  - For interior and exterior use.
  - Install using standard woodworking equipment - cut, sand, shape and finish like wood.
  - Material is Beige in color.
- For applications with a minimum radius of 6" or greater.
  
  Fastening
  Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives bond. Always install Flexible Moulding first is a relaxed non-tensile state. Nails should be kept to a minimum and 3/8" from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive.
  
  Cutting
  Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is only on the surface and will be eliminated if sanded.
  
  Painting
  Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.
Country USA
Brand Duraflex by Resinart
Manufacturer Resinart East, Inc
ItemPartNumber TWM105SS12/0
Model T-WM105-S-S12/0
Color Beige
UPCs 608729286431
EANs 7241871168328
ReleaseDate 0000-00-00

Country	USA
Brand	Duraflex by Resinart
Manufacturer	Resinart East, Inc
ItemPartNumber	TWM105SS12/0
Model	T-WM105-S-S12/0
Color	Beige
UPCs	608729286431
EANs	7241871168328
ReleaseDate	0000-00-00

Flexible Moulding - Stain Grade Oak - Flexible Quarter Round Moulding - WM105 - 3/4" X 3/4" - 12' Length - Flexible Trim

You might also like...