FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part for Food

FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part for Food Processing & Medical Equipment
- Appearance/COLOR: AMBER
- Mix Ratio, by weight: 100:33 / Resin:Hardener
- Benefits: Medium viscosity low permeability good resistance class VI approved
- Cure Type: Heat cure or Room temperature
- Typical Applications: Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.
Cure Type: Heat cure or Room temperature Typical Applications: Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices. Viscosity @ 25 C, cps: 4,700 @ temperature 77F, 25C Specific Gravity, cured: 0.900 g/cc Pot Life: 25 min Solids Content: 100% Volatile Organic Compounds (VOC) Content: 0.15 g/l Water Absorption , after 24 HR saturation, %: 0.30 Lap Shear Strength alum to alum: 2,100 24 HR @ 25C3300 4 HR @ 65C Hardness, Shore D: 86 4 hrs @ 65C75 24 hrs @ 25C 1 4 hours: @ 65C 24 hours: @ 25C Volume Resistivity: 1.20e+14 ohm-cm CTE, linear: 29.4 in/in-F @ temperature 68.0 F Glass Transition Temp, Tg: 97.0 C, 207 F Operating Temperature: -70 to 145 C FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment is a medium viscosity epoxy resin system specifically developed for medical device applications.FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part For Food Processing & Medical Equipment completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjecte
Country USA
Brand Epoxy International
Manufacturer Epoxy International
ItemPartNumber FDA-Bond 16-2.5
Color Amber
UnitCount 1
ReleaseDate 0000-00-00

Country	USA
Brand	Epoxy International
Manufacturer	Epoxy International
ItemPartNumber	FDA-Bond 16-2.5
Color	Amber
UnitCount	1
ReleaseDate	0000-00-00

FDA-Bond 16 Medical Grade Epoxy Adhesive, Two Part for Food Processing & Medical Equipment

You might also like...