Esright Brass Water Pressure Regulator 3/4 Lead-Free with Gauge for RV Camper Adjustable Water Pressure Regulator,Build-in Oil (NH Threads)
Sold Out / Out of Stock
Esright Brass Water Pressure Regulator 3/4 Lead-Free with Gauge for RV Camper Adjustable Water Pressure Regulator,Build-in Oil (NH Threads)
Durable lead free brass, under the NSF lead-free requirements of 0.2%. Double-layer inlet screened filter design will filter the particles like gravel, debris to prevent impurity blocking and valve body damage.
Compatible with U.S. 3/4" water sources(ND20) & NH threads. The build-in oil damps sudden pressure changes which may damage the gauge.
Adjustable up to 160 PSI (Maximum tolerable water pressure :240 psi) and easy to adjust, just adjust the brass screw (at the top on the regulator) to change the pressure - or + . Arrives with our easy installation guide.
Our water pressure regulator can reduce original water pressure and make it stable to use.
Easy clean valve spool, removable valve spool for easily cleaning or replacement when needed by removing it.
1.Connect the female fitting on the adjustable water regulator directly to your water source's hose bib. 2.Connect the female fitting on the water hose to the male fitting on the adjustable water regulator. 3.Turn on the water supply in order to flush the water regulator and hose for one minute. 4.Turn off the water supply. 5.Connect the hose to your water inlet, then turn on the water supply. 6.Turn on all fixtures to allow any air to be flushed out of the plumbing - this includes turning on showers, faucets, and flushing toilets. 7.Adjust the regulator screw (found at the top of the cap on the regulator) until it is set to the desired pressure reading. 8.Ensure that all fixtures have been turned off while making adjustments to the regulator screw until you reach the desired pressure reading. 9.Regulator gauge contains oil to reduce friction of internal components and greatly increases the life of the product.