Dixell XR02CX-4N1F1 Digital Temperature Thermostat Controller with Off Cycle Defrost 110V/50-60Hz for FRIDGES FREEZERS Heating Appliances
Sold Out / Out of Stock
Dixell XR02CX-4N1F1 Digital Temperature Thermostat Controller with Off Cycle Defrost 110V/50-60Hz for FRIDGES FREEZERS Heating Appliances
Suitable for applications on normal temperature refrigerating units
Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation.
Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened. In case of failure or faulty operation send the instrument back to the distributor or to “Dixell S.r.l.” (see address) with a detailed description of the fault.
Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining.
In case of applications in industrial environments, the use of mains filters (our mod. FT1) in parallel with inductive loads could be useful.