DROK® 0.56”Red LED Display Digital Tally Counter 0-9999 Up Down Counter Totalizer Electronic Counter with Magnetic Induction Switch DC5V
Sold Out / Out of Stock
This item may be available in a different size, colour, scent, version or platform:
DROK® 0.56”Red LED Display Digital Tally Counter 0-9999 Up Down Counter Totalizer Electronic Counter with Magnetic Induction Switch DC5V
Accurate digital counter with 0.56" LED display, magnetic induction switch.
Need seperate power, input DC5V, input current is less than 80mA, has a long service life.
Meassuring range is 0 to 9999, count input frequency id less than 2000Hz
Input signal voltage, High level H = 4 ~ 30V, low level L = 0 ~ 0.6V, falling edge trigger.
NPN/PNP open collector, contact switch, switch, limit switch, pulse of electrical level.
Technical parameters: Input pulse signal: open NPN / PNP collector contact switches, non-contact switch, limit switch, level pulse and so on. Input signal voltage: High level H = 4 ~ 30V, low level L = 0 ~ 0.6V, falling edge trigger Measuring range: 0 to 9999 cumulative count Count input frequency: less than 2000Hz Display: 0.56"high brightness LED Power supply: DC 5V ± 10%; < 80mA Working temperature: -10 ~ 60 °c (relative humidity of 80% or less) Dimensions: 79 x 43 x 25mm Mounting Hole Size: 75 x 39.5mm
Using: Move the magnet close to the magnetic proximity switch about 0.5-1 cm, then take the magnet away from the magnetic proximity switch for a certain distance (typically 3-5 cm or more). Then the product start counting and screen display add 1 per repeated movement. The counter should works on recurring machine, such as counting the up and down movement of punch, counting the circles of flywheel.
Note: 1, the count signal and reset signal input switching should closer to the counter terminal. 2, to avoid unnecessary interference, if necessary, please use shielded cable, shield connected to the count terminal "+". 3, recommended to use magnetic switch.