Creative Hobbies KM1 Kiln Sitter Cone Support Setting Gauge -

Creative Hobbies KM1 Kiln Sitter Cone Support Setting Gauge - Ensure Accurate Firing
- 🎯 ACCURATE FIRING: Use this small metal disk to adjust the Kiln Sitter actuating rod, ensuring a safe and accurate firing every time.
- 🔧 REGULAR MAINTENANCE: Adjust the actuating rod with the gauge after every 20 or so firings to maintain consistent firing temperatures.
- 🌟 COMPATIBILITY: Fits all Dawson kiln sitters for seamless integration.
- 🌡️ ORTON CONES: Ensures accurate kiln firing temperatures when using Orton cones for precise results.
The Dawson Kiln Sitter firing gauge is a small metal disk used to adjust the Kiln Sitter actuating rod to ensure a safe and accurate firing. Use the gauge to adjust the actuating rod after every 20 or so firings. Place the gauge on the cone supports, sliding the actuating rod through the hole in the gauge. If the actuating rod is not centered in the porcelain tube, loosen the two screws on the guide plate and move the guide plate from side to side. Lift the Kiln Sitter weight to the raised position. With the firing gauge in place, the trigger should just barely clear the release claw, coming as close as possible without touching. If the gap is wrong, loosen the set screw in the center of the weight, move the trigger and re-tighten the set screw.
Country USA
Brand Creative Hobbies
Manufacturer Creative Hobbies
Binding Unknown Binding
ItemPartNumber KM1
Model KM1
Color Gold
UPCs 617237781420
EANs 0617237781420
ReleaseDate 0000-00-00

Country	USA
Brand	Creative Hobbies
Manufacturer	Creative Hobbies
Binding	Unknown Binding
ItemPartNumber	KM1
Model	KM1
Color	Gold
UPCs	617237781420
EANs	0617237781420
ReleaseDate	0000-00-00

Creative Hobbies KM1 Kiln Sitter Cone Support Setting Gauge - Ensure Accurate Firing

You might also like...