Caswell COPPER CONDUCTIVE PAINT - 4OZ

Caswell COPPER CONDUCTIVE PAINT - 4OZ
- Ideal for electroforming.
- Can be applied by sprayer, brush or roller just like ordinary latex paint!
- Good surface resistivity of
- Dried coating is stable up to 250° F.
- Covers 670 ft² per gallon per mil thickness if application is 100% efficient
Make non-conductive items such as plastics, resins, leather, ceramics, cardboard, flowers, leaves, roses etc. conductive so they can be plated. Water Based. Non Hazardous for Shipping. Can be shipped by air and internationally. Developed initially as an RFI/EMI shield for plastic electronic equipment housings. Good surface resistivity of <1 Ohm/sq at 1 mil dry film thickness. Attenuation: more than 75 dB from 30 MHz to 1.5 GHz. Porous items such as leather, cardboard, plants etc. should first be dipped in our Sealer Concentrate. Most plastics can be sprayed directly. No primer required. Water based, latex paint. Non toxic and non hazardous. Can be thinned if desired with up to 6:1 water. Air dries in 1 hour. Coverage approx 20 sq ft per 4 fl oz. It can be applied directly onto acrylic, ABS and structural foams, as well as solvent sensitive materials such as polycarbonate and polystyrene. It can be applied to almost any other non-porous surface, just use a latex primer first.
Country USA
Brand Caswell
Manufacturer Caswell
Binding Office Product
ItemPartNumber CCP
Size 4 Ounce (Pack of 1)
UnitCount 1
UPCs 727908358681
EANs 0727908358681
ReleaseDate 0000-00-00

Country	USA
Brand	Caswell
Manufacturer	Caswell
Binding	Office Product
ItemPartNumber	CCP
Size	4 Ounce (Pack of 1)
UnitCount	1
UPCs	727908358681
EANs	0727908358681
ReleaseDate	0000-00-00

Caswell COPPER CONDUCTIVE PAINT - 4OZ

You might also like...