Breather Cloth Non Woven Polyester Bleeder Cloth Fabric for

Breather Cloth Non Woven Polyester Bleeder Cloth Fabric for Vacuum Bagging Infusion (1 Yards x 60”)
- ✨ Breather cloth is a non-woven polyester fabric that is designed to allow airflow throughout the vacuum bagging process as well as bleed out an excess resin in a composite part. It allows great conformity around a composite part while under vacuum pressure.
- ✨ Breather cloth's function is to allow air and volatiles to be removed within the vacuum bag and across the corner of the laminate or the mould. It is a very useful material in vacuum bagging and helps in maintaining the vacuum throughout the mould during the process.
- ✨Bleeder cloth is a thin, stretchable, high fill non-woven polyester that will easily conform to the contours of a part. It can be reused if a non-porous release film is used to prevent the breather from absorbing the resin. To control resin content of the laminate use a porous or perforated release film on top of the laminate to allow the resin to be absorbed into the bleeder cloth
- ✨ The fabric is 10 yards x 60” wide, Weight: 4 oz sq yd , Width: 60" , Length: 360". Breather Fabrics are used in Aerospace, Consumer Recreation, Defense / Ballistics, Industrial / Corrosion, Infrastructure, Marine, Transportation, Wind Energy / Power.
- ✨ Lightweight, polyester fabric absorbs excess epoxy and provides exceptional air passage inside the vacuum envelope during laminating applications. 60" wide breather fabric is available in 10 yard lengths.
Country USA
Brand Venom Carbon
Manufacturer ICT
ItemPartNumber Breather
UnitCount 1
ReleaseDate 0000-00-00

Country	USA
Brand	Venom Carbon
Manufacturer	ICT
ItemPartNumber	Breather
UnitCount	1
ReleaseDate	0000-00-00

Breather Cloth Non Woven Polyester Bleeder Cloth Fabric for Vacuum Bagging Infusion (1 Yards x 60”)