Blisstime Pendulum Clock Movement Mechanism Replacement, DIY

Blisstime Pendulum Clock Movement Mechanism Replacement, DIY Clock Motor Kits with Hands - 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length
- ★ Good Choose for You DIY or Repair : ★ Our pendulum clock mechanism set with pendulum clock movement, rubber washer, brass washer, hex nut, hour & minute & second hands and black end cap. Perfect clockworks for designing new clocks or to replacement the motors on old clocks!
- ★ Pendulum Clock Mechanism Shaft Length : ★ 14.6mm/0.57in threaded shaft, total 23mm/0.9in including the hand stem, suitable for 9-13mm/0.35-0.50in thickness clock panel.
- ★ Size of movement and hands : ★ Movement Size--56mm x 110mm x 22mm(case thickness) / 2.2” x 4.3” x 0.87”(case thickness) ; hour hand--68mm/2.7” ; minute hand --98mm/3.8” ; second hand--100mm/3.9” (the size of hands are from center of mounting hole to end tip. )
- ★ Two Style & Easy to Install : ★ Our clock set with second hand and black end cap for your choose. If you use the second hand, then do not need to install the black end cap on clock. It’s very simple to install, please check our third product picture!
- ★ TIPS : ★ Please gently press the clock hands onto shaft at 12:00 position or they will be bent; Keep the clock hands parallel; Kindly tear off the protective film on the clock hands; Only use 1.5V AA battery (not included).
Blisstime Pendulum Clock Movement Mechanism Replacement, DIY Clock Mechanism with Pendulum, Clock Hands and Motor Kits - 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length
Material : Plastic + Aluminum
Size :
Movement Size : 56mm x 110mm x 22mm(case thickness) / 2.2" x 4.3" x 0.87"(case thickness)
Threaded shaft length : 14.6mm/0.57in
Total shaft length : 23mm/0.9in (including the hand stem)
Three hands size : (the size of hands are from center of mounting hole to end tip)
Hour hand : 68mm/2.7"
Minute hand : 98mm/3.8"
Second hand : 100mm/3.9"
Power : 1.5V AA battery (not included)
Feature :
Two style to install for your choose
Easy setup quartz clock movement
Good Choose for You DIY or Replacement
Tips:
Please gently press the clock hands onto shaft at 12:00 position or they will be bent
Keep the clock hands parallel
Kindly tear off the protective film on the clock hands
Package included:
1 X Pendulum clock movement
1 X Hour hand
1 X Minute hand
1 X Second hand
1 X Rubber washer
1 X Brass washer
1 X Hex nut
1 X Black end cap
Country USA
Brand Blisstime
Manufacturer Blisstime
UPCs 754933312562
EANs 0754933312562
ReleaseDate 0000-00-00

Country	USA
Brand	Blisstime
Manufacturer	Blisstime
UPCs	754933312562
EANs	0754933312562
ReleaseDate	0000-00-00

Blisstime Pendulum Clock Movement Mechanism Replacement, DIY Clock Motor Kits with Hands - 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length

You might also like...