BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer
- 【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- 【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
- 【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
- 【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
- 【Tips 】Please let us know directly through Amazon if you have any problems about our products, BIQU customer service team are always ready to offer help!
Firmware Introduction
1. Ways to obtain the firmware of motherboard
2,Get it from customer service or technical staffï¼›
Log in the open source website of our company to download ï¼š https://github.com/bigtreetech

Firmware update
Firmware file name:
BIGTREE_TFT35_V3.0. ( version number).bin
First copy the above firmware to SD root directory, and then insert the card into the SD card slot of the board. Next please re-power the board or press the reset key, and wait for about 10 seconds before the update is completed.
Something Important
1. When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2. When using serial port screen mode, connect with TFT or AUX-1 on the motherboard via RS232. This mode has touch function.
3. Two work modes can be changed by one key. Press the encoder about 3 seconds until the mode selection page appears, then press the encoder after selecting the mode.
Product Specification
Appearance sizeï¼š93*87mm
Installation sizeï¼šPerfectly replace the original LCD screen of Ender3 printer, detail information please check TFT35-E3 V3.0 SIZE
Microprocessorï¼šSTM32F207VCT6
Power Inputï¼šDC 5V
SD card logic voltageï¼š3.3V and 5Vï¼ˆSuch as: support MEGA2560 main control chip motherboard, higher compatibility)

Package Included
TFT35 E3 V3.0*1
Country USA
Brand BIQU
Manufacturer BIQU
Binding Misc.
ItemPartNumber BIQU-ZZB0003781109
Color black
ReleaseDate 0000-00-00

Country	USA
Brand	BIQU
Manufacturer	BIQU
Binding	Misc.
ItemPartNumber	BIQU-ZZB0003781109
Color	black
ReleaseDate	0000-00-00

BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer

You might also like...