Automotive Fuel Injector Tester, 12V 4 Pulse Modes, Handheld Car Vehicle Fuel Pressure System Diagnostic Scan Testing Tool Gauge, Individual Test Stuck/Leaking/Burnt-out Problem
$ 162
Availability: Currently in Stock
Delivery: 10-20 working days
This item may be available in a different size, colour, scent, version or platform:
Automotive Fuel Injector Tester, 12V 4 Pulse Modes, Handheld Car Vehicle Fuel Pressure System Diagnostic Scan Testing Tool Gauge, Individual Test Stuck/Leaking/Burnt-out Problem
This injector tester with 41.5cm/ 16.3 inches test lead can work with any fuel pressure tester. Please NOTE: Gasoline car only, NOT the diesel engine
4 MODES- Large LED display with 4 pulse modes- Short/ Medium/ Long/ Continuous modes help to identify good or bad injector.
DIAGNOSE INJECTOR PROBLEMS- you can use it to test each injector individually to help identifing stuck, leaking or burnt-out conditions. It works with engine off and pulse timer may be used with fuel pressure gauge.
MODE LOCK FEATURE The mode lock feature ensures test condition uniformity.
RELIABLE- With CE Marking, it complies with all essential health and safety requirements set out in European Directives
The tester can help diagnose injector problems, you can use it to test each injector individually to help identify stuck, leaking or burnt-out conditions. It uses 12V vehicle battery for power. It has 4 pulse mode,(1)Short,(2)Medium,(3)Long ,(4)Continuous mode that helps identify good or bad injector.
Features Digital LCD display Four (4) Pulse Mode *Mode 1 : outputs 1 pulse, whose pulse width is about 250ms. *Mode 2 : output 50 pulses, every pulse's pulse width is about 7ms. *Mode 3 : output 100 pulses, every pulse width is about 3.5ms. *Mode 4 :output pulses continously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms. At any time, you can press the PULSE key again to stop outputting pulse. Pulse Signal Indicator Mode Set and Pulse Key Features It complies with all essential health and safety requirements set out in European Directives
Specifications: Black Clip- Used to connect to the negative terminal of battery Red Clip - Used to connect to the positive terminal of battery Pulse Output Terminal - Used to connect to the injector to be tested Power Supply: 12V Vehicle Battery Operation Environment : 0°C~40°C, relative humidity <80% Storage Environment : -10°C~50°C, relative humidity <85% Size : 147 x 82 x 29mm (for main body only) Weight : about 165g
Please NOTE: Gasoline car only, NOT the diesel engine
Set includes: 1 x Injector Tester 1 x English Manual 1 x Carrying pouch Standard Packaging Box