Alchemy Power Inc. Pi-EzConnect. Raspberry Pi 4, Pi 3 etc GPIO

Alchemy Power Inc. Pi-EzConnect. Raspberry Pi 4, Pi 3 etc GPIO Connector. A HAT to Connect GPIOs and sensors to Raspberry a Pi
- Use the Raspberry Pi to its full extent. Connect multiple GPIOs to multiple sensors and other electronic devices using Pi-EzConnect.
- Solder connections for power (5V, 3.3V, Ground). Solder connections for other components (a mini breadboard).
- Solderless connections for all GPIO, power (5V, 3.3V, Ground).
- Compatible with Raspberry Pi 40 pin header definition and HAT format.
- Works with 40 pin header Raspberry Pi e.g. Pi-2, Pi-3 as well as Orange-Pi, Digi ConnectCore and other computers which follow 40 pin HAT format.
Before Pi-EzConnect, a flat ribbon cable, a breadboard and other wires are being used to connect the temperature sensor to the Raspberry Pi. With the Pi-EzConnect, the connection is simplified as shown. Watch the video on You Tube - https://youtu.be/oChXSE0etQw Power bus - both 3.3V as well as the 5V power bus is available on Pi-EzConnect. Ground bus is also available on Pi-EzConnect. Electronic devices such as pull up or pull down resistors, LEDs, other components can easily be soldered onto the solder points on the Pi-EzConnect. Sensors can also be soldered on solder points provided. Alternately, use the solderless connectors provided. Extended header pins allow other HATs to be connected to Pi-EzConnect without any loss of functionality. To mount the Pi-EzConnect board on the Raspberry Pi use the 2.5mm x 15mm brass spacer standoff kit for Raspberry Pi HATs / boards available from Amazon (Amazon URL https://www.amazon.com/dp/B01M71WKMS - copy and paste the URL in your browser if you cant find the kit). These spacers provide stability to the board and the Raspberry Pi. Data sheet and other relevant information on Alchemy Power web site. Pi-EzConnect works with 40 pin headers conforming to Raspberry Pi 40 pin definition. This includes variants as Pi-2, Pi-3, Asus Tinker board, Orange etc.
Country USA
Brand Alchemy Power Inc.
Manufacturer Alchemy Power Inc.
Binding Personal Computers
ItemPartNumber 691852747122
Model Pi-EzConnect
UPCs 691852747122
EANs 0691852747122
ReleaseDate 0000-00-00

Country	USA
Brand	Alchemy Power Inc.
Manufacturer	Alchemy Power Inc.
Binding	Personal Computers
ItemPartNumber	691852747122
Model	Pi-EzConnect
UPCs	691852747122
EANs	0691852747122
ReleaseDate	0000-00-00

Alchemy Power Inc. Pi-EzConnect. Raspberry Pi 4, Pi 3 etc GPIO Connector. A HAT to Connect GPIOs and sensors to Raspberry a Pi

You might also like...