AdirPro Universal Rotary Laser Detector (LD-8) - Digital

AdirPro Universal Rotary Laser Detector (LD-8) - Digital Rotary Laser Receiver with Dual Display and Built-In Bubble Level, Compatible with All Red Rotary Lasers - Rod Clamp Included
- ✔️ BETTER ACCURACY: AdirPro Rotary Laser Detector boasts a working range of 2,000 feet (Depending on laser). With an accuracy of ±1/16 inches (1 mm) and ±1/8 inches (2.5 mm), it easily directs the user to position the laser higher or lower on a grade rod. This ensures an accurate level reading all the time.
- ✔️ EASY READING: Our Laser Receiver has a dual-sided crisp clear LCD display. It displays clear and accurate readouts of the elevation, grade sensitivity, and audio and battery status. It also comes with a built-in bubble level for added convenience.
- ✔️ LONG BATTERY LIFE: Featuring an auto-shutoff feature, this Laser Detector automatically powers off after 10 minutes of inactivity. This lets you extend the device's battery life. A 9V battery will give you approximately 40 working hours of continuous use.
- ✔️ WIDE COMPATIBILITY: Our Universal Rotary Laser Detector is compatible with any Red Rotary Lasers. It works in all lighting conditions, which makes it ideal for both indoor and outdoor use. It comes with a compatible rod mounting bracket with ¼” threading on the nut and screw.
- ✔️ ROBUST CONSTRUCTION: AdirPro 790-01 LDG-8 Universal Rotary Laser Detector boasts a heavy-duty build and construction with its hard plastic housing and rubber casing. It is IP55 dustproof and water jet resistant – making it ideal for all sites and weather conditions.
Quickly and accurately locating laser signals even when the beam is invisible to the eye, AdirPro 's LD-8 Laser Detector is compatible with all red rotary lasers in any lighting condition . This allows for use both indoors or out, including installing ceiling tiles, aligning shelves, installing receptacles for power in a home, trenching, laying pipe, setting concrete forms and leveling driveways. Laser receivers can shorten the amount of time needed to find the beam and get on level. Easy to use, the AdirPro features a magnetic strip that allows you to affix the receiver onto any metal surface. The interface is user-friendly , smart in its simple design and the readouts are clear and accurate . Built tough to last, the detector is robust with its hard plastic housing and rubber casing to provide long-term durability and use, as well as protection against weather conditions. For convenience, it boasts a dual-sided LCD display that shows the elevation, grade sensitivity, audio and battery status. A built-in bubble level provides an extra measure of leveling accuracy, while the accuracy mode allows you to switch between ultra fine and very coarse. Both the volume and backlight to the liquid crystal display can be adjusted with the simple touch of a button. In addition to the on/off button, there is an automatic shut-off feature that will power down the device after about 10 minutes of being idle. The LD-8 laser detector comes complete with a compatible rod mounting bracket . Secure the receiver to the clamp with the thread screw and then clamp the receiver to a grade rod or wooden pole. The non-expanding bolt adjustment system easily adjusts with a screwing motion and ridged edges give extra friction to secure the clamp to the rod.
Country USA
Brand AdirPro
Manufacturer AdirPro
Binding Tools & Home Improvement
ItemPartNumber 790-01
Model ADI790-01
Color Red Beam
UnitCount 1
UPCs 815236013416
EANs 0815236013416
ReleaseDate 0000-00-00

Country	USA
Brand	AdirPro
Manufacturer	AdirPro
Binding	Tools & Home Improvement
ItemPartNumber	790-01
Model	ADI790-01
Color	Red Beam
UnitCount	1
UPCs	815236013416
EANs	0815236013416
ReleaseDate	0000-00-00

AdirPro Universal Rotary Laser Detector (LD-8) - Digital Rotary Laser Receiver with Dual Display and Built-In Bubble Level, Compatible with All Red Rotary Lasers - Rod Clamp Included

You might also like...