ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV

ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing (Clear, 500g)
- 【Safer and Ultralow Odor】 Made from soybean oil, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.
- 【Easy to Use & Stunning Colors】 High precision and quick curing for LCD 3d printing and high quality pigments provide stunning colors in our range of resins and available colors. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- 【Fast Curing & Exposure Time】 Optimized curing time for Anycubic Photon, offering better printing quality. Bottom layer exposure: 60-80s; Normal exposure: 8-10s.
- 【Wide Compatibility】 Sensitive to 355nm~405nm UV light. Compatible with all LCD 3D printers.
- 【Attention & Storage】 When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping. Store in a dry and dust-free place under 15℃-35℃ and keep it sealed and keep it away from sunlight.
ANYCUBIC 405nm UV resin 3D Rapid Photopolymer Plant-based Resins for LCD 3D Printing 500g/1000g

Safer and ultralow odor : Biodegradable and made from soybean oil, truly eco-friendly. No VOCs, no BPA, no harmful chemicals.Complied with EN 71-3:2013 safety standard.
Stunning Colors ：High Quality pigments provide stunning colors in our range of Resins and available colors (pink, blue, green, vilolet, orange, yellow)
Fast curing & Exposure Time: Optimized curing time for Anycubic Photon, offering better printing quality. Bottom layer exposure: 50-60s; Normal exposure: 8-10s
Wide compatibility: Sensitive to 355nm~405nm UV light. Compatible with most LCD/DLP 3D printers.
Attention & Storage : When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping. Store in a dry and dust-free place under 15℃-35℃ and keep it sealed and keep it away from sunlight.

Usage condition

Shake up the bottle before use and avoid direct sunlight and dust.
Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation.
Recommended usage temperature: 20-25℃.
Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds or with dish wash liquid solution.

Attention

When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping.
Wash with plenty of water immediately if got accidently skin contact.
If feel discomfort after you got skin contact, please see a doctor ASAP.
Do not drink it and keep it sealed and out of the reach of children.

Storage

Store in a dry and dust-free place under 15℃-35℃.
Keep it sealed and keep it away from sunlight.
Country USA
Brand ANYCUBIC
Manufacturer ANYCUBIC
Binding Unknown Binding
ItemPartNumber SWJSZ-US
Model SWJSZ-US
Color Clear
Size 500g
ReleaseDate 0000-00-00

Country	USA
Brand	ANYCUBIC
Manufacturer	ANYCUBIC
Binding	Unknown Binding
ItemPartNumber	SWJSZ-US
Model	SWJSZ-US
Color	Clear
Size	500g
ReleaseDate	0000-00-00

ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing (Clear, 500g)

You might also like...