AC Compressor Clutch Kit Assembly Fit Honda Civic 2006-2011
Sold Out / Out of Stock
AC Compressor Clutch Kit Assembly Fit Honda Civic 2006-2011
A/C COMPRESSOR CLUTCH FITMENT - Compatible fit for 2006-2011 Honda Civic,compatible with Engine FA1 FD1 FD7
What is A/C COMPRESSOR CLUTCH:The AC compressor is the core of the automotive air conditioning refrigeration system, which is driven by the engine through an air conditioning clutch. When the compressor is overloaded, the clutch will also protect the compressor under certain conditions
Caution: Clean the cooling system piping of your car before installing the compressor. If the debris or metal chips in the cooling system piping get stuck in the system, the life of the components will be greatly shortened
The compressor clutch is a large electromagnet that pulls the clutch plate into the clutch pulley when energized.As long as current is supplied to it, the magnetic field holds the clutch plate tightly on the clutch pulley
Warranty:We will be pleased to serve you if you encounter any problems when you are replacing
The complete kit includes: Pulley that has been pressed into the bearing Electromagnetic coil Clutch plate SHIMS Keep editing Center nut WIRE CLIP Wiring harness with hot wire
Accurate fit HONDA CIVIC 2005-2012 1.8 LITER SANDEN TRSE07 4901 or 4918
Replacement for: 2006-2011 Honda Civic 1.8L Replaced Part Number of Matched AC Compressor: 4918, 4918U1, 38810-RNA-A02, 38800-RNA-A011M2, 98555, 97555 4992, 38810RNAA02, 38810RRBA01, 3410, 4901, 80221SNAA01, 80221STKA41, 80221SVAA01, 80221SWAA02
How to replace with new AC compressor Clutch 1) Always wear goggles and start with the installation tool. 2) Remove the clutch rotor using a puller. 3) Remove the bearing from the clutch rotor. 4) Measure the gap between the friction surfaces of the compressor clutch. 5) Ohm check single-line AC compressor clutch coil, ground is supplied through the compressor main body. 6) Two high pressure cut-off switches. If the system pressure is too high, the single function switch will interrupt the compressor function. The dual function switch first engages the high speed cooling fan in an attempt to reduce the pressure by increasing the heat transfer at the condenser. However, if the system pressure continues to rise after the fan is turned on, the switch will interrupt compressor operation. 7) Hold the clutch hub with the appropriate tool while removing the bolt or nut. 8) Use a puller to remove the clutch plate and hub. 9) It is also recommended to search for relevant installation videos on the Internet.