DACRO SCRW #6X1-1/4

DACRO SCRW #6X1-1/4"5LB
- Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8
- Screw length measured from top of flat to tip of screw 1-5/8" (1.625") - Screw head Diameter 0.340"
- #2 Robertson Drive ( Square )
- Made of highly corrosion resistant 18-8 Stainless steel
- Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface
DECK SCREWS ARE SPECIALIZED FASTENERS DESIGNED TO RESIST CORROSION IN ADVERSE OUTDOOR ENVIRONMENTAL CONDITIONS. The deck screw drives easily into deck boards, and once set, the head lays smoothly against the deck surface. Deck screws feature a Robertson Drive, also known as a Square, or Scrulox drive which has a square shaped socket in the screw head for high torque and minimal slippage. Since wood decks have many thin planks and must withstand harsh environmental conditions, deck screws are designed to accommodate the challenges of this application. They must resist corrosion, drive easily, and lay smoothly against the deck surface, called countersinking. For these reasons, many deck screws are self-countersinking, self-drilling, and coated with materials that won't rust. Like other screws, deck screws come in a wide variety of lengths and widths, called shanks. They also use different shapes of driver, the part on the screw head that allows a screwdriver to dig in to the wood and rotate. A popular head shape is a square, because it holds the driver and doesn't strip as easily as Phillips heads. One feature of deck screws that makes them easy to install is the sharpness of their point. They often come to a very sharp, narrow point, to reduce the necessity of drilling pilot holes. Especially in a soft deck wood like cedar, these screws can be fastened without needing to pre-drill the hole, called self-tapping. Secondly, screws designed for a deck will propel themselves into place because of their unique shank design. The thread of the screw is measured in degrees, so a shallower degree means more thread along the length. These threads spread out the force, so the screw takes less effort to put in, yet it is still difficult to pull out. Some types of deck screws are lubricated so they slide into the wood even more easily.
Country USA
Brand Fastenere
Manufacturer Fastenere
Binding Misc.
ItemPartNumber ssds8158-100
Color Silver
Size #8 x 1-5/8"
UnitCount 100
ReleaseDate 0000-00-00

Country	USA
Brand	Fastenere
Manufacturer	Fastenere
Binding	Misc.
ItemPartNumber	ssds8158-100
Color	Silver
Size	#8 x 1-5/8"
UnitCount	100
ReleaseDate	0000-00-00

DACRO SCRW #6X1-1/4"5LB

You might also like...