Brand new 16GPM, 2 stage hydraulic replacement pump for most log splitters on the market today.
It is brand new and has never been opened or used. The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. Specifications: * New Hydraulic Log Splitter Pump 16 GPM @ 3600RPM * Model # GP-CBN-160 Shaft: ½" * Inlet port: 1" * Outlet port: ½" * Dimensions: 7- 1/4" L with shaft 5- 5/8" L without shaft 3" across body 3 -3/8" across mounting surface * Minimum 8 HP or larger gas engine, direct drive only, horizontal shaft For use with open center hydraulic systems only * First Stage: 13 GPM @ 650 PSI * Second Stage: 3.5 GPM @ 2500 PSI * Maximum pressure: 4000 PSI * Bolt circle: 2.83in. 4 holes spaced 2" on center * Mounting hole diameter: .344in. * Woodruff key: 1/8in. * Rotation is clockwise Flow rates on the hi-low tandem pumps are 0.256 cu in/rev on the low flow and 0.793 cu in/rev on the high flow pump. * This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient. * The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. * ToolTuff also has in stock 11, 13, 22 & 28 gpm log splitter pumps ready to ship. * We also carry hydraulic cylinders and control valves for the most common log splitters on the market today. * We are supplier of log splitter OEM parts in the United States and Canada. Please contact us for any questions and we always offer discounts for bulk orders.