14mm Triple Square XZN Socket, Lella Autosport Compatible with VW and Audi
Sold Out / Out of Stock
14mm Triple Square XZN Socket, Lella Autosport Compatible with VW and Audi
Used on Mk5(06-09), Mk6(10-14), and MK7(15-18) Golf/GTI/Jetta to remove the rear calipers(except R32 ).
Used on Mk5 and MK6 Golf/GTI/Jetta to remove the front struts from the knuckle.
3/8" Square Drive, 1.10 inch total length
Hardened Steel with Chrome Plating for long life.
Lifetime Warranty (not for use on air tools)
This is the tool that is needed to remove the rear calipers on the Mk5(2006-2009), Mk6(2010-2014), and Mk7(2015-2018) Golf/GTI/Rabbit and Jetta (except R32 and R Models), they use a 16mm socket). It is also used to remove the front struts from the steering knuckles. It has a 3/8" Square Drive and its short lengths allows you to easily reach behind the calipers to loosen and remove the bolts. If in doubt what size is needed, measure the bolt from the one tip to the other as shown in the picture, and that dimension is the size of the tool that is needed.