Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels

Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb
- Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition.
- BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel’s diameter, the range of length is 23 - 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats.
- The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
- The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
- TRIPLE heavy duty, TRIPLE quality made! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include - spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
The Product is Designed and Made by Seamax Marine
ADJUSTABLE DESIGN: These wheels have 4 adjustment positions for length and angle to adjust the leg length, push in the spring loaded buttons on each side of the leg and either pull or push to lengthen or shorten. To adjust the leg angle, push down on the spring loaded bar near the top of the leg assembly and move the leg assembly to the desired location. To remove the leg assembly from the bracket, pull out the quick release pin located at the top of the leg assembly.
MAX LOAD: This dolly set is designed for boats with solid outboard transom, the length of the boat should be less than 16FT for easier moving. Total weight should not exceed 600 Lbs including boat, outboard and all accessories.
INSTALLATION: This dolly set should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 6 holes (5/16") in the plywood transom for the mounting brackets (3 holes per bracket). It is very important to locate the position of the holes correctly (2 holes at lower position, 1 hole at upper position). Please check carefully including checking the wheel arm position before starting to drill any holes.
Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don't store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket.
Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
Country USA
Brand Seamax
Manufacturer Seamax Marine
Binding Misc.
ItemPartNumber Deluxe Boat Wheels
Model Reborn Pro Wakeboard Rack Glossy Black
Color Sliver
EANs 6924456528748
ReleaseDate 0000-00-00

Country	USA
Brand	Seamax
Manufacturer	Seamax Marine
Binding	Misc.
ItemPartNumber	Deluxe Boat Wheels
Model	Reborn Pro Wakeboard Rack Glossy Black
Color	Sliver
EANs	6924456528748
ReleaseDate	0000-00-00

Seamax Deluxe 4 by 4 Boat Launching Dolly with 14" Wheels System, Commercial Grade Quality for Inflatable Boat and Aluminum Boat Max Loading 600Lb

You might also like...