Top Flite MonoKote RC Covering Film, Flexible High-Gloss Polyester - 6' x 26" Roll (Flat Dove Gray)
$ 132
Availability: Currently in Stock
Delivery: 10-20 working days
Top Flite MonoKote RC Covering Film, Flexible High-Gloss Polyester - 6' x 26" Roll (Flat Dove Gray)
Easily achieve smooth, glossy finishes for your RC model project.
Superior shrink and adhesion make MonoKote the easiest plastic covering film to apply.
One of the most puncture- and scratch- resistant coverings available, to keep your model looking its best.
Over fifty vibrant colors available, in combination with six different finishes: Opaque, Transparent, Neon, Metallic, Pearl, and Flat.
Fuel-proof, waterproof and provides a high gloss finish.
This is the Top Flite Flat Dove Grey MonoKote. Includes: One Roll of 6' x 26" Flat Dove Grey Covering
Requires: Sealing Iron (TOPR2100) Iron Sock (TOPR2175) Heat Gun (TOPR2000)
Notes: Paints, Trim Sheets and EconoKote of MonoKote May Vary Slightly In Color Between Production Runs on These Products. Not for use directly on foam! Temperature ranges; Attaching to wood (activating the glue): 240 - 275 Degrees F Partial shrinkage: 230 - 270 Degrees F Maximum shrinkage: 270 - 350 Degrees F This flat MonoKote is slightly different then the traditional coverings. Because of its flat finish you must use a higher temperature when applying the cover. This finish may require the hot iron to make contact with the covering and wood longer than the standard finish. Be sure not too apply it too loosely, it may be difficult to get a tight shrink with this product. Also, when you apply it loosely it could become impossible to remove any wrinkles