KOOKYE 5X Nano V3.0 Atmega328P Module CH340G 5V 16M Mini USB

KOOKYE 5X Nano V3.0 Atmega328P Module CH340G 5V 16M Mini USB Micro-Controller Board for Arduino Without kookye Box (10)
- The Nano for arduino is a compact board similar to the UNO.The Nano for arduino is a small, complete, and breadboard-friendly board based on the Atmega328P . It has more or less the same functionality of the Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
- The Nano for arduino can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50k Ohms. In addition, some pins have specialized functions.
- The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analog Reference( ) function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.
- The Nano for arduino has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication.
More Download Information: www.kookye.com/?p=6382
--The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).
--The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
--The ATmega328 has 32 KB, (also with 2 KB used for the bootloader). The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.

--Specification--
Microcontrollerï¼šAtmel Atmega328P-AU MCU
Operating Voltage (logic level)ï¼š5 V
Input Voltage (recommended)ï¼š7-12 V
Input Voltage (limits)ï¼š6-20 V
Digital I/O Pinsï¼š14 (of which 6 provide PWM output)
Analog Input Pinsï¼š8
DC Current per I/O Pinï¼š40 mA
Flash Memoryï¼š16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
SRAMï¼š2 KB (ATmega328)
EEPROMï¼š1 KB (ATmega328)
Clock Speedï¼š16 MHz

Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software

Dimensionsï¼š0.73" x 1.70"
Lengthï¼š45 mm
Widthï¼š18 mm
Weigthï¼š5 g

Package:
10x Nano Board
Country USA
Brand KOOKYE
Manufacturer KOOKYE
Binding Personal Computers
ItemPartNumber 5x Nano
Model 5x Nano
Warranty 6 months
UnitCount 10
UPCs 762640544466
EANs 0762640544466
ReleaseDate 0000-00-00

Country	USA
Brand	KOOKYE
Manufacturer	KOOKYE
Binding	Personal Computers
ItemPartNumber	5x Nano
Model	5x Nano
Warranty	6 months
UnitCount	10
UPCs	762640544466
EANs	0762640544466
ReleaseDate	0000-00-00

KOOKYE 5X Nano V3.0 Atmega328P Module CH340G 5V 16M Mini USB Micro-Controller Board for Arduino Without kookye Box (10)

You might also like...