GALYGG 24 Key LED Strip Controller, Wireless Rectifier Control

GALYGG 24 Key LED Strip Controller, Wireless Rectifier Control Box, IR Remote Controller, DC 12V 3A Power Supply Plug Adapter for 2835 3528 5050 RGB LED Strip Lights Flexible Tape Lighting
- Input 100-240 V 50 / 60 hz. Output 12 V, 2A
- 16 static colors with brightness increase and decrease. 4 light patterns flash, strobe, fade-change, rgb smooth change. Turn on / off or adjust as you like
- 24 key rgb ir remote control is perfect used in 5050 2835 3528 led rgb light strip, is dedicated to 4 pin led strips
- First pull out the plastic cover on the buttom of remote before use. Second connect box output port with led strip (arrows marks between control box and strip connector should be on same position). Third remote should be aimed at the ir receiver and without any obstacles. Fourth indoor use only, keep away from water
- 1 x 24 key ir remote controller, 1 x rectifier control box, 1 x 12 V 3 A power supply connector, 1 x 4 pin male to male connector, can be pulled out if you don't need it
- Type: 24 key remote controller + rectifier control box + DC 12V 5A power adapter ( American Standard ) + instruction manual
- Output voltage:DC 12V
- Output current: 5A max
- Working temperature: -20°C - 60°C
- Connecting mode: common anode
- Control box size: about 1.97 x 1.38 x 0.87 in
- Remote controller size: about 3.35 x 2.04 x 0.28 in
- Remote controller battery: 1 x CR2025
- Special note: In use, it is necessary to determine between the signal receiver and the remote control that there is no (block) blocking signal.

Country	USA
Brand	GALYGG
Manufacturer	GALYGG
Binding	Kitchen
ItemPartNumber	GG-KZQ
Model	24Key Controller + 12V 3A adapder
Warranty	Not applicable.
Color	White
UnitCount	1
UPCs	652042908723
EANs	0652042908723
ReleaseDate	0000-00-00

GALYGG 24 Key LED Strip Controller, Wireless Rectifier Control Box, IR Remote Controller, DC 12V 3A Power Supply Plug Adapter for 2835 3528 5050 RGB LED Strip Lights Flexible Tape Lighting

You might also like...