Dogwidgets DW-16 Rechargeable Remote 2 Dog Training Shock and Vibration Collar

The set has 2 levels of shocks and 1 level of vibration and has 600 feet range.

Collar will work with small, medium and large dogs from 15 to 100 lbs. Train your dog individually with a shock and vibration or correct your 2 dogs at the same time with a vibration.

Use this collar for basic training, potty training, biting, jumping on people, chasing cars, running away and barking.

The dog training collar is very safe, effective, economic training device that works well at home and outdoors for trainers.

Product Features:

Simple remote operation with 7 buttons for shock and vibration. No need to toggle/switch buttons to give corrections to your 2 dogs.
2 levels of shock(Low and High).
1 level of strong vibration for each dog which stops dog's bad behavior 99% of the time.
Correct each dog with a shock or vibration or correct both dogs at the same time with a strong vibration.
Sleep mode feature to save battery life.

The set contains:

2 collars adjustable from 6" to 24" long.
2 rechargeable collar receivers.
1 remote control transmitter(9-volts battery included).
dual charger for the 2 collars.
2 sets of rubber and metal prongs for the collars and 2 sets of long metal prongs for long haired dogs.
2 shock tester, 1 user manual.

Troubleshooting tips:

Charge the collar 8 hours straight for the first use. Pair the remote and the collar if the collar won't respond with the remote. To pair the collar and the remote, remove the screw of the collar then gently poke the reset button inside the hole. Then hold the V button of the remote for the 1st collar and keep holding it until the collar vibrates. Repeat the procedure for the 2nd collar. If the red or yellow led light of the remote is flickering or no light, replace the 9-volt battery. If you need technical assistance, contact us at [email protected] or at 916-710-9603.