ATOPLEE 1/8" Shank Carbide Burr Bits,10PCS Tungsten Carbide

ATOPLEE 1/8" Shank Carbide Burr Bits,10PCS Tungsten Carbide Rotary Tool Double Cut Deburring Bits for DIY, Metal Grinding,Stone Carving,Wood Engraving
- 【Well-Designed-Double Cut & 1/8 Shank】 Shaft diameter: 1/8 inch(3mm); Rotary Burr Bit Size: 6mm. The dual-wire design of the cutter head produces a finer finish than single-wire cutting, clean and fast cuts in hardened steel with a smoother surface.
- 【Tungsten Carbide and Good Cutting】 The speed is generally 6000-30000 rpm.Too high speed may bend the shaft .Rotary Burr Bits is made of Tungsten Carbide, which is high hardness, sharper, heat resistance and long working life, better resistance to chipping and corrosion, and faster cutting efficiency.
- 【Elaborate Processing】The carefully designed cutting edge of each burr is sharp, and the individual burrs of different shapes and sizes can be easily created. Suitable for operation in confined spaces, it ensures long-lasting performance under high impact and resists wear and tear.
- 【Good Feeling of Use】Carbide Rotary Tool Bits are of good quality, comfortable to use, easy to control, works with low vibration and low noise, and makes it easy to make clean cuts without much effort.
- 【Multi-Purpose】Carbide Rotary Drill Bits can be used to process all kinds of metal and non-metal engraving, polishing and removing sharp edges, suitable for wood carving, stone carving, metal processing and molded grinding machines.
Main use: Tungsten steel grinding head is widely used in industrial sectors such as machinery, aviation, automobile, shipbuilding, chemical engineering and process engraving.

(1) It can process all kinds of metals (including hardened steel) and non-metals (such as marble, jade, bone), and the processing hardness can reach up to HRC70.

(2) Can clean the flash, burr, weld of casting, forging and welding parts.

(3) It can be used for chamfering and groove machining of various mechanical parts, cleaning pipes, and finishing the inner hole surface of mechanical parts.

Operating instructions: It is mainly driven by electric tools or pneumatic tools (also can be installed on the machine). The speed is generally 6000-40000 rpm. When using, the tool needs to be clamped.

The cutting direction should be evenly moved from right to left. Cutting, do not use too much force, avoid cutting and scattering during operation. To avoid applying too much pressure when the speed of the grinder becomes too small, this will cause the burrs to overheat and become dull.

Secondly, the tool should be brought into maximum contact with the workpiece as much as possible, because more cutting edges can be used.

By deepening the workpiece, the machining effect can be improved. Avoid the burrs shaft touching to the workpiece as this can overheat the burrs and even damage the joint.

Country	USA
Brand	ATOPLEE
Manufacturer	ATOPLEE
Binding	Tools & Home Improvement
ItemPartNumber	FBA_CNMX-Hardlines-496146
Model	FBA_CNMX-Hardlines-496146
Color	Silver
Size	1/8"Shank,10pcs
UPCs	601308133942
EANs	0601308133942
ReleaseDate	0000-00-00

ATOPLEE 1/8" Shank Carbide Burr Bits,10PCS Tungsten Carbide Rotary Tool Double Cut Deburring Bits for DIY, Metal Grinding,Stone Carving,Wood Engraving

You might also like...