JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield

JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 18mm, 11/16” Aprox. I.D., 6 Foot)
- JCP Cool Sleeves Quality Heat Treated Fiberglass, Silicone Bonded to an Aluminum Alloy Outer Skin. I.D. = Inside Diameter
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards.
- Better than Heavy Silicone Tape, Sleeves are lightweight & slide over disconnected wires, lines hoses or pipe.
- Reflects over 90 % of Radiant Heat, Fireproof, Oil Resistant, Lightweight, Pliable for a tight fit. Rated for Extreme Heat: Able to withstand continuous exposure of up to 2000° F & Direct contact up to 500° degrees
- Included is our Aluminum Termination Tape. Use it to give a finished edge and seam to your sleeve. Secure your work. Tape can be cut in strips to maximize coverage
Cool down with JC PreformanceÂ© Cool Sleeves. Available in multiple lengths and diameters to fit: wiring, fuel lines, brake lines, intake tubes, intercooler pipes, spark plug wires, battery cables, A/C hoses, radiator hoses and more. Easy to trim. Slides right over wires, cables and hoses. For best results seal the sleeves at each end with adhesive foil tape, shrink tube or stainless steel cable ties. To ensure a proper fit, allow extra room for bends (for example: a 90Âº bend in a 3/4" tube will NOT fit in 3/4" I.D. Sleeve, In this case you would need 1" I.D. or higher) I.D. = Inside Diameter

Country	USA
Brand	JC PERFORMANCE PRODUCTS USA
Manufacturer	JC PERFORMANCE PRODUCTS USA
ItemPartNumber	JCP-ALHS-A
Model	ALHS AV
Color	6 Foot
Size	Sewn-Seam 18mm, 11/16” Aprox. I.D.
UnitCount	1
UPCs	788536622872
EANs	0788536622872
ReleaseDate	0000-00-00

JCP USA Slip-Over, Cool Sleeves, Aluminum Metallic Heat Shield Sleeve Fiberglass Insulated Wire Hose Cover (Sewn-Seam 18mm, 11/16” Aprox. I.D., 6 Foot)

You might also like...